Plasma Cutters
Choose Wisely: Pilot Arc or Scratch Start Plasma Cutter
Real, shed-tested plasma cutter reviews, comparisons, and fix guides. I put popular machines and torches through cut tests, air-pressure setups, and consumable burn-rate checks so you know what actually works. You’ll find pilot-arc vs non-pilot-arc explainers, compressor sizing, standoff vs drag-tip results, and common “won’t arc” fixes. See today’s Amazon price on each review and, if you’re in NZ, grab PT-31, SG-55, and P-80 consumables direct.
Disclosure: I may earn a small commission from Amazon links, at no extra cost to you.
![bestarc Plasma Cutter, [Pilot Arc][Large LED Display][Air Sensor] 50A bestarc Plasma Cutter Machine 110/220V Dual Voltage, 1/2'' Clean Cut 3/4 Inch Max Cut, Post Flow Mesh, 2T/4T for Beginners DIY](https://m.media-amazon.com/images/I/416mVEDalGL._SL160_.jpg)
Most Common Cause
Wet / Low Air
Quick Win
Replace Tip/Electrode
Torch
PT-31 / SG-55
Verdict
- 90% of no-arc issues are air, ground, or worn consumables — easy checks first.
- Keep air dry and at the right flow; moisture kills arc stability and tips.
- Ground clamp on clean metal, close to the cut; inspect cable for heat damage.
- Confirm torch safety interlocks and cup seating; replace cheap tips more often.
Key Specs / Setup
| Recommended Air | 5–6 CFM @ 90 PSI (dry, filtered) |
|---|---|
| Tip Gap | 1–2 mm with standoff guide for cleaner kerf |
| Leads | Keep short & undamaged; check ground clamp jaws |
| Common Torches | PT-31, SG-55, P-80 |
FAQ
Most hobby plasma cutters need 4–6 CFM @ 90 PSI; keep air dry to protect consumables.
Pilot arc starts without touching, handles paint/rust, and saves tips; non-pilot arc is cheaper but wears faster.
Check air pressure, moisture, tip/electrode wear, ground clamp, and torch safety switch.
Drag tips work but overheat; a 1–2 mm standoff keeps kerf clean and extends consumable life.
Match consumables to the torch model; mixing parts reduces cut quality and lifespan.
Plasma Cutters
Troubleshooting
Alternatives
Budget 40A Cutter
Good for 6-8 mm plate
Higher Duty 60A
Better for 10-12 mm continues
Pilot Arc Bundle
Includes SG-55 torch + spares
Join The Shed
3,000+ Tool Nerds already get Pete’s weekly deals, behind-the-scenes updates, and honest test notes. No spam. Unsubscribe anytime.
About Pete
I’m Pete – I test cheap tools so you don’t waste your money. With 14M+ YouTube views, my goal is simple: keep it fun, honest, and a bit chaotic. If it’s rubbish, I’ll tell you. If it’s good, you’ll know. That’s the Pete’s Tools promise.
Some links are affiliate. It helps fund the tests — at no extra cost to you.
Affiliate Disclosure